Yes, a sim rig holds a 49 inch super ultrawide when the stand matches the VESA pattern of the screen, has a stiff main beam and sits at the right height in front of the wheel. Most 49 inch super ultrawides use a VESA 100 by 100 mm mount, and they are much heavier and wider than a normal gaming monitor. A stand built from 40 by 80 mm profile, either integrated or freestanding, gives the calmest image.
Super ultrawides keep growing in popularity in 2026, mainly because they give a wide view without the bezels of a triple setup. Mounting one on a rig is simple, as long as you check a few specs first.
What makes a 49 inch screen different?
A 49 inch super ultrawide is basically two 27 inch screens joined into one curved panel.
Width and curve
A 49 inch screen with a 32:9 ratio is about 120 cm wide and only about 34 cm tall. The panel is curved, so the edges sit closer to you than the centre. That curve pushes the centre of gravity forward, away from the mount. On a weak stand, that forward weight makes the screen nod with every bump in force feedback.
Weight and VESA
These screens are a lot heavier than a 27 inch gaming monitor, even without their own desk foot. Always check the weight without stand on the spec sheet of your model. Most use VESA 100 by 100 mm, but some models need an adapter. The VESA pattern is the square of four threaded holes on the back of the screen.
SIMGASM | Apex Integrated Single Monitor stand Vesa 75/200 - Black
Which stand holds a super ultrawide best?
You have two options, and both work when the stand is stiff enough.
Integrated stand on the rig
An integrated stand bolts to the front of the cockpit. It keeps the screen close and low, right behind the wheelbase, which is ideal for a wide view. The SIMGASM Apex Integrated Single uses 40 by 80 mm profile and supports VESA 75, 100 and 200. That deeper profile resists the forward pull of a heavy curved panel better than a compact 40 by 40 mm beam. A rig with a strong frame helps too, so pair it with a stiff sim racing cockpit.
Freestanding stand around the rig
A freestanding stand stands on its own feet and never touches the cockpit. Force feedback from a strong direct drive base then never reaches the screen. The trade off is a slightly larger footprint. If you race with a wheelbase of 15 Nm or more, a freestanding stand often gives the calmest picture.
Set the right height and distance
A super ultrawide only feels natural when it sits in the right spot.
Height
Place the screen as low as possible, with the bottom edge just above the top of your wheel rim. Your eyes should look at the upper third of the screen. A low position matches the real view out of a race car and makes the horizon feel right. Our guide to monitor placement behind or above the wheelbase goes deeper.
Distance
Sit as close as your wheel allows, usually 50 to 80 cm from eye to screen. A closer screen fills more of your view, so a correct field of view in the game looks more natural. If you are still choosing between screen types, compare triple monitors vs ultrawide vs VR.
SIMGASM | Vesa mounting bracket set 75 / 100 / 200mm - Black
Avoid the common mounting mistakes
Most problems with a super ultrawide come from three simple mistakes.
The first mistake is mounting the screen too high, because the desk foot taught you to. The second is using a stand with a thin beam that flexes under the forward weight of the curve. The third is skipping the bolt check: tighten all VESA bolts again after the first few sessions, as vibration settles every joint. If the screen still shakes, read why your monitor shakes on your rig.
Founder Johan Akkerman designed the complete SIMGASM range and leads prototype evaluation and final inspection himself. His background as an automotive technician and workshop manager for premium car brands such as Jaguar shows in stands that use steel mounting parts on strong aluminium profile. SIMGASM is a Dutch company, formally incorporated on 27 February 2026.
SIMGASM | Apex Free Standing Single Monitor Stand Vesa 75/200 - Black
Want a wide view without bezels? Choose a sim monitor stand that matches the VESA pattern and weight of your super ultrawide.
Q&A
Here are quick answers to common super ultrawide questions.
Is a 49 inch ultrawide better than triples?
It is simpler, with one cable and no bezels. Triples give a wider view in tight corners. The choice depends on your games and budget.
Do I need a VESA adapter?
Only if your screen uses a pattern your stand does not support, or the mounting holes sit deep in the curved back. A bracket set solves both.
Can a compact rig hold a super ultrawide?
Yes, but a freestanding stand is often the better choice on a compact rig with a strong wheelbase, because it keeps the screen still.
How low should the screen sit?
Just above the top of the wheel rim, with your eyes on the upper third of the screen.
Want to learn more? The SIMGASM experts are happy to help.
