If you’re researching TREQ monitor mount guide, you’re probably trying to answer one simple question: will this rig stay rigid, feel adjustable, and support future upgrades without turning into a messy project?

Aluminium profile rigs (often called “8020 rigs”) are popular because they let you move everything: wheel height, wheel distance, pedal angle, pedal height, seat position, monitor position, and accessory placement. But not every profile rig delivers the same real-world experience.

Why monitor mounting is part of “rig stiffness”

Your screen is effectively your “windshield”. If it moves when you brake hard or hit a curb, it breaks immersion and can even hurt consistency. Monitor mounting is also where many first-time rig builders accidentally create a problem they can’t tune out later.

Integrated vs freestanding: the real trade-offs

When integrated mounts are a great choice

• single monitor or lighter ultrawide
• you don’t run heavy tactile or motion
• you prefer a compact, minimal footprint build

When freestanding stands win

• triple monitors where alignment matters
• you plan to upgrade pedals and add tactile
• you want to keep your screen perfectly aligned while you adjust the rig

SIMGASM monitor options that stay aligned

• Integrated and clean: SIMGASM Core integrated triple monitor stand (Core)
• Freestanding and future proof: SIMGASM Apex freestanding triple monitor stand (Apex)

If you want the screen to stay stable while you upgrade pedals, add tactile, or go motion later, a freestanding stand is usually the easiest path.

Two alignment tips that save hours

1. Set your eye point first: sit in the final seat position, then bring screens to your eyes, not the other way around.
2. Use small steps: align center screen, then side screens, then bezel correction.

Continue reading

• Triple monitors vs ultrawide vs VR for sim racing
• Triple monitor alignment problems solved: angles, bezel and eye point
• Direct drive torque explained: how much Nm do you really need

More TREQ guides

• TREQ Rookie vs SIMGASM Hobby: choosing your first aluminium profile cockpit
• TREQ One vs SIMGASM Club: 80x40 rigs for direct drive and load cell pedals
• TREQ CXX vs SIMGASM Sport: 120x40 rigs for clean builds and big upgrades
• TREQ Ace vs SIMGASM Pro: 160x40 rigs for motion and high torque

FAQ

• Should I mount my monitors to the rig or use a freestanding stand?
  If you plan to upgrade pedals, add tactile, or go motion later, a freestanding stand usually keeps alignment easier. Integrated mounts look clean and work great for simpler builds.
• Do triple monitors need VESA 75 or 100?
  Most sim racing monitors use 75×75 or 100×100. Always check your monitor’s VESA pattern before you buy arms or plates.
• How close should my monitors be?
  Close enough to fill your field of view, far enough to avoid eye strain. Many people aim for the screens to sit just behind the wheel rim line.
• What causes triple alignment headaches?
  Rushing the eye point. Set seat position first, then center monitor, then side angles, then bezel correction.
• Is an ultrawide easier than triples?
  It’s simpler to align, but triples usually give a wider side view and stronger spatial cues in wheel-to-wheel racing.

FAQ

• How tight should profile bolts be?
  Tight enough that nothing shifts under force, but avoid over-tightening that strips threads. Tighten in stages and re-torque after a week.
• Do I need threadlocker?
  It’s not mandatory, but it can help on bolts that see repeated vibration. Use it selectively.
• Why does my rig squeak?
  Usually a slightly loose joint or a cable rubbing a profile. Find it by pushing on the rig while listening.
• How do I stop pedals from moving?
  Use proper mounting and make sure the pedal deck is clamped correctly. High-force pedals punish weak mounting.
• Do I need to re-check alignment?
  Yes, especially after moving the rig or changing hardware. Small shifts can change feel significantly.